News

Good day every visitors We come back to work now. Everything goes well. If you need to order anything, please kindly contact us. Thanks and best wishes iphone-part.com team

To Every visitors: We will start holiday for Chinese Lunar Year! From Jan 25th to Feb 4th. No shipping during holiday. We will come back to work on Feb 5th. All orders will be shipped out as soon as possible after we come back. Thanks for your cooperation! Best wishes NOKO ELECTRONICS CO., LTD www.iphone-part.com Emergency call: 008613715307970

Merry Christmas and Happy New Year To Everyone!

Few months after iPhone 7 releaseing, consumers start to collect iPhone 8 information. They are eager to know any news of iPhone 8. The latest news said, Apple may use plastic OLED on iPhone 8 in 2017. For 10 years anniversary, Apple may design a iPhone special version in 2017. It means we will see 3 versions of iPhone in 2017, including 2 versions (4.7 inch and 5.5 inch) who use LCD and a new plastic OLED iPhone 5.1 inch or 5.2 inch. The OLED screen is more durable, anti-scratch. It is said, Apple already order OLED screen to Samsung, they gave up the glass LCD screen since iPhone 4. Samsung arrange 1000 millian OLED production capacity for iPhone 8. Some other people said, iPhone 8 will support wireless charging. As we know, comparing to LCD, plastic OLED screen is more colorful. It has smaller power consumption, and the screen support edge designation. But the lifetime of OLED is shorter. The technology of mass production is not so good, which make the cost to be higher. Some other smartphone manufacture already use plastic OLED, but it is the first time for Apple to use it. In smartphone field, it is a trend to use plastic OLED. Samsung is using OLED in it's mobile more and more offen. LG and Sharp also pay attention to it. They are trying to catch up Samsung step. As we know, iPhone 7 has no big improvement in spite of iPhone 6S. many users hold on their pocket, and waitting for iPhone 8. Buy iPhone 7 Screen for replacement!

Samsung Note 7 battery blasted no long time ago, now Apple iPhone 6S battery problem appear. More and more iPhone users claimed their iPhone 6S or iPhone 6G have battery problem. The machine will shut off automatically while battery remain 20% or 30%. It can't turn on untill plugged in. This problem always happened after IOS system updated. Some iPhone 6S suddently have this affair after few months running, even user do nothing to it. It is not easy to fix this problem. Somebody try to re-install the system to fix the problem, but they failed. Other people updated iPhone to latest IOS 10 system, but problem keep on. Well, if we replace the battery, the problem will be removed? the answer is no. Apple didn't give any official explaination and solution to it. Some users estimate the problem is on battery, they think the battery aging is much fast than normal, which cause 20% material inside are useless, so the capacity of battery are only 80% left. Another voice tell us, the problem is on iPhone module which calculate the power of battery. As battery aging, the module can't check how many power left in the battery, it make iPhone shut off. If your iPhone have this problem, you can hardly get help from Apple store. People in Apple store will always test the battery, and tell you everything goes well, they can do nothing for help. However, there are some solution from some forums. Strange things can happen with your battery gauge on an iPhone: Your battery percentage is at 10 or 15 percent, but suddenly, the iPhone turns off by itself. What is causing your iPhone to shut down unexpectedly and prematurely? This issue was and is affecting a number of devices and can`t be pinned down to one specific iPhone generation. Fortunately, we have a number of solutions to this strange issue that you can try to fix your iPhone. If the device is still up and running for most of the time, you shouldn`t have to worry about a dead battery. Try some of our suggestions and see if they help! Issue: iPhone turns off by itself before battery is empty Just to clarify the issue we`re dealing with in this guide: Your iPhone shuts off by itself, before the actual battery percentage reaches a number that is lower than, say, five percent. It may be shutting of at 10 or 15 percent, or even earlier, while the battery life seems to have gotten worse over time. And if you reconnect your iPhone to a charger after losing power, it may display an irrationally high percentage of charge, which couldn`t be possible after such a small period of charging, right? This sounds like you could benefit from one of our three fixes for the [iPhone battery dead?" issue. Solutions 1. Check your time and date settings In one of the support documents Apple details a possible solution to fixing issues with your iPhone 6s and iPhone 6s Plus battery percentage. If the battery percentage doesn`t update by itself, you can try going into your Settings app. Select General, then Date & Time and verify whether the option titled Set Automatically is active. When active, your timezone and the time will be updated automatically according to your location and the battery percentage should update as well. 2. Calibrate your iPhone battery The most common solution would be to calibrate your iPhone`s battery. This is pretty easy. Simply use your iPhone until it turns off due to low power, deplete the battery as fully as possible. You can do this by turning up the brightness and watching a few streaming videos on YouTube or iTunes via Wi-Fi or playing a demanding game. Then wait for a minute or two, after the iPhone turns itself off. Connect the iPhone to a charger and let it charge until it is at a full 100 percent. Wait for another 60 to 90 minutes before you unplug it, just to make sure that the device is fully charged, as the charger goes into [trickle-charging" mode at the end of the cycle. Your iPhone battery should now be fully calibrated and provide you with more accurate readouts. You can repeat the process to further increase the accuracy. 3. Restore your iPhone (without a backup) Open up the [Settings" app, then go to [General" and finally [Reset". Now tap the button titled [Erase All Content and Settings". Then follow the assistant to set up your iPhone as a new device, instead of selecting your most recent backup. This will provide you with an opportunity to test the iPhone as a clean slate, so to speak. If your battery issues are gone, you had a software issue. If you still experience the premature shutdown issue, check the next solution. 4. iPhone 6S Battery replacement Last but not least, there is always a possibility of hardware failure. Most of the time this is simply due to the fact that the lifespan of your iPhone battery has reached its end. This means that Apple, a service provider or you will have to replace the battery in the device. iPhone battery replacement via Apple Check out the corresponding Apple battery service page for your current region. Depending upon where you live, conditions may vary. In the United States, Apple is offering a full-fledged battery service for $79 plus $6.95 for shipping.

Note 7 blast affair deeply hurt Samsung. Samsung, even Korea not only lose money but also lose reputation. It is hard to estimated how long time they need to eliminate the bad influence. Mobile blast is a nerve spot for all over the world. Now Apple iPhone 7 Plus blast ...... An user from Yunan China claimed his iPhone 7 Plus blast either. What happened to this machine? The user said: "i dropped my iPhone 7 Plus to ground by accident, then it start to smoke, and shake drasticly, few minutes later, the iPhone 7 Plus Screen smashed to pieces and aparted from the machine". From the photo, we can conclude: this iPhone is damaged completly, it is impossible to repair it. Normal mobile fire can't make this result. It probably caused by battery blast. Only impact force can damage the screen completly. To be lucky, this is only a single affair. Samsung Note 7 blast is a collective affair. Buy iPhone 7 Plus Parts from iphone-part.com

It is said, Apple will release iPhone 8 to market after iPhone 7 production. If it is true, there won't be iPhone 7S anymore. Except 4.7 inch and 5.5 inch, iPhone 8 has another new size: 5 inch. We are not sure what it will be called, iPhone 8 mid? News from Nikkei Asian Review: 2017 is 10 years anniversary of Apple, it is a very special date. Apple will probably release 3 versions of new iPhone to fit market inquirement. Somebody think 5.5 inch is too large, but 4.7 inch is too small. But can Apple satisfy all users? Some other news said, iPhone 8 may give up home button absolutly. There won't be any home key in surface anymore, the Touch-ID will be under screen. The 5.5 inch iPhone 8 may use edge screen, just same like Samsung S6 edge. Jonathan Ive who is the CDO of Apple indicated that the coming iPhone mobile seems like a slim glass. It is largly different from before iPhone in appearance. We you also like this iPhone? Buy iPhone Accessory from iPhone-part.com

Is a people in the world who called iPhone 7? The answer is yes. And it is not a nickname, it is a official name in passport. This strange and interesting story happens on Ukraine. Ukraine Apple Store delared a new policy: if somebody changed his official name into iPhone 7, then he can get a free iPhone 7 machine from local Apple store. To enjoy the free gift, a man who called Olexander Turin changed his official name into iPhone 7. Now he still didn't get the machine, but he is waitting for it. Many people don't agree his behavior. They think the name is from family, it is not wise to change it in order to get a iPhone. But Olexander Turin don't care what his neighbour say. Now his parents and sister start to accept his idea. His girl friend also stand in his way. She said:" i think it is a good idea to change name into iPhone 7. If i have same chance, i will also try this new feeling". This strange promotion is from a new Ukraine Apple store in 2016. They will offer latest Apple device to anyone who is willing to give up their birth name. It was difficult to accept that and hard to believe it is true. But if you would like to enjoy this promotion, you can go Ukraine to try it. Buy iPhone 7 Parts from iphone-part.com

Apple released iPhone 7 and 7 Plus on Sep 16th. 1 months past, there are more and more spare parts appear to the market for iPhone 7 replacement. Such as display screen, back housing, battery, charging dock flex, Power on/off flex, Backlight .... If any user dorpped his new iPhone to ground by accident, and destroyed some parts, it is lucky that he can get new iPhone 7 parts for repair. As a new iPhone version, all spare parts in the market are 100% original. There is no copy or refurbish parts currently. Some people buy new iPhone 7 mobile, disclose it, and get every kinds of spare parts. Then they sell those parts on the market. This is the only way of sourcing. So currently, all parts of iPhone 7 and iPhone 7 plus are very expensive. If you just buy a new iPhone 7 or 7 plus. Please take care of your precious mobile. To avoid accident, you can use a iPhone 7 soft silicone case to protect the back housing, and buy a iPhone 7 tempered glass to protect iPhone 7 screen. This 2 accessories can help you to avoid 90% damage.

After 7 days holiday for Chinese day, almost all iPhone screen price go up, both OEM and copy. iPhone 4 screen: same price as before. iPhone 5 screen: price rise 4 to 5$ iPhone 6 screen: Price rise 4 to 5$ iPhone 6 plus screen: Price rise 1$ iPhone 6S screen: same price as before iPhone 6S plus screen: same price as before. Some LCD factorys are still on holiday as lack of material, they can't start production. It cause there is no enough iPhone LCD in the market. So the price are always go up. In my mind, few days later, when there is enough iPhone LCD in the market, the price will go back down. If you need any iPhone LCD urgently, please contact us to order it.

There are 3 kinds of iPhone 6S Screen in the world currently: OEM, copy and original. The original screen is made by Foxconn, it is same as Apple use. Original iPhone 6S screen are best quality, but it is very expensive. Very few customers would like to offer the high cost. Now lest talk about the OEM and Copy screen. OEM iPhone 6S screen is made in China, it use original LCD + copy digitizer + original Flex. Original LCD bring very nice display result. Most people like this screen, as it is not big different than original. Comparing to the low price, the quality is also acceptable for most iPhone 6S users. OEM iPhone 6S screen has AAA quality and A quality. AAA quality is perfectly, no die pixel on LCD, while A quality have few default. All parts in Copy iPhone 6S screen are made in China, including LCD, touch screen digitizer and flex. The quality of copy screens are weak than those original and OEM screens, but it's price are much lower. Currently, there are 3 kinds of copy iPhone 6S screen in the market: LG LCD, TianMa LCD, Zhanwang LCD. Mostly, we only offer LG LCD to our customers, as it is better quality than other 2. iphone-part.com offer all kinds of iPhone 6S Screen. Wellcome to contact us for business!

We will start 7 days holiday for Chinese Day in October: From Oct 1st to Oct 7th Nobody work on holiday. We will be back to work on October 8th. All orders from Oct 1st to Oct 7th will be shipped out in Oct 8th. Please kindly know it. Thanks for your cooperation!

Apple released iPhone 7 and iPhone 7 Plus few days ago. Thousands of people waited for it in queue. It is said to be the strongest iPhone version currently. Now let's open and check it. And the winner is-.Intel, at least in the iPhone 7 A1778 we have in our lab. The Intel and Apple iPhone 7 rumors have been circulating around for a while, but from our experience, we know better not to believe everything we hear. However today seeing is believing and we have indeed found an entire Intel mobile cellular platform inside the iPhone 7. Intel supplied not just one, but two RF transceivers, the baseband modem, and the (RF) power management IC. Murata is another notable absentee in the RF front end, being replaced by Skyworks for the diversity receive modules. They do have the WiFi win, though. The TDK-EPC filter banks may still help Qualcomm get in on the iPhone 7 action. In the past we have found Silanna Semiconductors, now Qualcomm, in the TDK-EPC modules. Our labs will help confirm this soon. It`s not all about RF wins and losses. We confirmed the Apple A10 processor in our iPhone 7 is a TSMC chip, and we are currently looking to identify the die node technology, so stay tuned. We also found a win for MegaChips, (formerly SiTime), with one of their MEMS clock ICs. We have found MEMS clocks in mostly Wearables and some game controllers, but not many in our mobile device teardowns. External Apple iPhones have garnered a fair share of admirers, especially from their closest competitors like Samsung, Huawei, and even Xiaomi. But if it looks like an iPhone, feels like an iPhone, acts like an iphone, and is missing a headphone jack - then, it is an iPhone 7 (or iPhone 7 Plus). The omission of the headphone connector may have freed up some precious internal design space, but whatever BoM and test savings were garnered were at least partially spent with the lightning headphone adapter Apple is supplying with every iPhone 7 and iPhone 7 Plus. Just a few more words on the external features before we move on to the inside design. Apple made it a point to highlight the `new antenna` design being part of the enclosure. What we think Apple meant was you just can`t see the antenna from the outside. For quite sometime now the RF antennas have been designed as part of a phone`s enclosure, and that is not just unique to Apple phones. It is just as likely to find an antenna designed within a phone`s enclosure as it is to find a phone with a separate antenna element. Like always we will be taking a close look at the X-rays and the enclosure to see if there is something more to this story. The board shots A10 Fusion Processor Apple`s part number for the A10 is APL1W24, 339S00255 vs the Apple A9, which was APL1022, 339S00129. We are not certain what the addition of the `W` in the new number signifies. As we mentioned above, our iPhone 7 A1778 had an A10 application processor from TSMC. If you remember on the iPhone 6S, both Samsung and TSMC supplied the A9 processors. As of this writing we do not know if that is still the case, or if the A10 is being single sourced from TSMC. Our die photo of the A10 shows a die part number of TMGK98 which is continuing up in sequence from the A9`s TMGK96. The A10 die size is ~125 sq. mm with a reported 3.3 billion transistors. We have confirmed the process to be TSMC 16FF-based, so this means that Apple has basically been in the same 20/16nm technology for the last 3 generations, and it took 2 iterations on FinFET for Apple to get the A10 back to the gate densities we saw in the A8, optimized on a planar process. A notable difference from the A9 to the A10 is much tighter SoC-level die utilization, which is more in line with the A8. This, along with tighter 9-Track and 7.5-Track libraries of an 16FFC process, are expected to have kept the die from bloating to the ~150 sq. mm level that we were expecting from a straight scale of the A9 to the A10, in terms of transistor count. It has been impressive how architectural and design techniques have exploited the device-level performance boost from 20nm planar to 16FF FinFET, and the expected improvement in 16FFC, to continue the speed improvement and power reduction, despite the lack of gate-level scaling. This goes to show that there is a lot more to SoC optimization than just scaling, and makes it all the more important to understand how to best squeeze performance out of the latest or previous technology nodes. Update: die image Now we have a transistor-level die image, and we can see the circuit blocks, so here is our conjecture as to what we have; We`re pretty sure about the GPU and SDRAM interface blocks, but for us the question is, where are the two new low-power cores announced by Phil Schiller during the launch last week? We are looking for two pairs of cores that are usually symmetrical in layout, and the large high-power cores are fairly obvious on the right side of the die image. However, they take up ` ~16 mm2, compared with the ~13 mm2 used by the A9 cores; so do we have more powerful and larger high-power cores, or are the [little" cores integrated with the [big" ones in the same area, on the left of that block? The existence of two large blocks of SRAM in there (compared with the A9`s single area LINK TO A9 BLOG) provides some support to that theory. On the other hand, we have two other twin blocks that we have marked up that could also be CPU cores. We need further investigation, or reader information gratefully received! Beyond the die, one important factor for performance, has been achieved via packaging. The A10 processor is incredibly thin, giving credibility to the reports that TSMC`s InFO packaging technique is being used. The A10 sits below the Samsung K3RG1G10CM 2-GB LPDDR4 memory. This is similar to the low power mobile DRAM as the one we found in the iPhone 6s. Looking at the X-rays we see the four dies are not stacked, but are spread out across the package. This arrangement keeps the overall package height to a minimum. Assembled in a package-on-package assembly with the A10 InFO packaging technique reduces the total height of PoP significantly. Baseband In the iPhone 7 Model A1778 we have torn down, we see Intel`s Baseband Processor (Modem) PMB9943. We suspect that this is the rumored Intel XMM7360 modem. We will decap it and shoot the die photo and update this blog as images become available. UPDATE: our lab did an excellent work in depotting the Intel modem quickly. We have confirmed that it is Intel XMM7360. The modem die size is ~66.4 sq. mm. What will be interesting at least to us, is whether we will find an Intel platform in the CDMA versions of the iPhone 7 and iPhone 7 Plus, or if Qualcomm will get the win. We will be doing a Deep Dive report on an iPhone 7 CDMA A1660 version to find the answer. RF Transceiver Intel continues their win in the iPhone 7 with two Intel PMB5750s, or what they call their SMARTI 5 RF Transceivers. Here again, TSMC wins as well, as the SMARTTI 5 RF transceivers are built on TSMC`S 28nm process. Power Management ICs A newcomer, Intel`s PMB6826, otherwise called X-PMU 736 is found in the iPhone 7. Like the SMARTI 5 RF transceivers, the X-PMU 736 is part of Intel`s XMM 7360 platform. While Intel handles its own cellular ICs, Dialog continues to have a presence in Apple phones. Here we have the 338S00225, a new Apple/Dialog Semiconductor PMIC for the iPhone 7. For your reference, the previous iPhone 6S and 6S Plus used 338S00120 and 338S00122 respectively. Microphones As per normal multi-source philosophy of Apple, the microphones are being supplied by a few well known qualified vendors. In our model A1778, we have two microphones at the bottom of the phone and two up at the top. The microphones at the bottom are sourced by Goertek and Knowles. The microphones on the upper part of the phone are Goertek and Knowles. Looking over at the iFixit teardown of the iPhone 7 PLus we see STMicroelectronics has also scored design wins into the iPhone 7 PLus. Flash Memory Since Chipworks and TechInsights have now joined forces, this is the first official quick turn of a 128 GB Apple phone for some of the participants from the TechInsights teardown team. This means for some of us, it is the first time we have seen an SK Hynix H23Q1T8QK2MYS 128-GB part with EMI shielding, fabricated in 15-nm technology. Our second phone confirms the memory is definitely being dual-sourced because it has a Toshiba THGBX6T0T8LLFXE 128 GB NAND memory IC also fabricated on 15 nm. Rumour has it the 256 GB version of the iPhone 7 will have 3D NAND. This is what is expected since that will be a thinner eight-die stack of 256-Gb dies, as opposed to a 16-die stack of 128-Gb parts. The question is, will it be Samsung, Micron/Intel, or even Toshiba? Again, all answers we will uncover once we have completed our teardowns. Cameras Cameras have become such an important feature of any smartphone, and maybe even more so for the iPhones, Samsung Galaxy phones, now even Huawei is jumping all in with their dual camera on their latest flagship the Huawei P9. At this point, the camera of the iPhone 7 is in the lab to determine who made what, and the optical image stabilization source. Stay tuned! Touch Screen Controller The Touch Controller for the iPhone 7 is manufactured by Universal Scientific Industries (USI) with markings O1 1R. It is the same as the iPhone 6S - a pressure-sensitive 3D Touch layer that buzzes slightly when you press and hold the screen/static home button. It was found under a metal shielding and though no markings were found on the IC, it is believed to be Analog Devices. NFC Controller We found an NXP NFC Controller with package markings 67V04 (likely PN67V) in the iPhone 7. We will decap it to get the die photo to see if it is a new designed NFC controller. For your reference, the previous iPhone 6S had the NXP PN66V10 NFC Controller, which has the die PN549. Wi-Fi The WiFi / Bluetooth socket has been won by Murata with a module part number 339S00199. These modules have historically been multi-component packages. We will decap it to find who wins the Wi-Fi controller and verify who else might be within the module. GPS Broadcom wins the slot in the iPhone 7: BCM47734. This possibly contains Sensor Hub functionality as well like BCM4773 & BCM4774 seen in Samsung devices. Apple did announce the A10 has its own sensor hub, so if the BCM47734 does have a sensor hub it may not be utilized here in the iPhone 7. Audio ICs The iPhone 7 still uses the same Apple/Cirrus Logic 338S00105 Audio Codec as in the iPhone 6S, but the Audio Amplifier has changed to the new 338S00220. (previously 338S1285). We found not just 2 but 3 Audio Amplifiers - we speculate there is one audio amplifier for for each of the two speakers, and the third amplifier is for the headphone via the Lightning port. The third Audio amplifier is situated next to the Applications Processor Module with 3 black blobs on it. It was discovered during de-soldering of the A10 applications processor. When the blob was scraped off, it was an `oh wow, there are 3 audio amps!` kind of discovery. RF Front-end This time around (or at least in this version), Apple opted to use Skyworks for their GSM PA only, but not for any of the Low, Mid, or High band PA Modules. Those were covered by Avago (Broadcom) and Qorvo. Qorvo parts are now beginning to be marked Qorvo now rather than TriQuint or RFMD. Skyworks wasn`t left out though, and seemed to push out Murata for some of the Diversity Receive Modules used at the top end of the phone (although Murata did get the WiFi/BT Module socket). TDK-EPC has been making a single appearance in the last couple of iPhones and iPads, while this time we find what looks like to be filter bank sockets located centrally between the two Intel RF transceivers. The following table highlights the RF design wins. Avago (Broadcom) AFEM-8060 Likely High-Band PAM (FBAR-BAW) Avago (Broadcom) AFEM-8050 Likely Mid-Band PAM Qorvo RF6110 Likely Low-Band PAM Qorvo 81003M Envelope Tracking Power Management IC Skyworks SKY77359 GSM PA TDK-EPC D5313 Filter Banks TDK-EPC D5325 Filter Banks Skyworks SKY13702-20 Diversity Receive Modules (integrated antenna switches) Skyworks SKY13703-21 Diversity Receive Modules (integrated antenna switches) Avago (Broadcom) DFI621 PA Duplexer Module Other ICs In the [miscellaneous" section we have; Lattice Semiconductor FPGA ICE5LP4K; NXP Interface IC 610A3B (likely a variant of CBTL1610A3); Texas Instruments Display Power Management TPS65730; Texas Instruments Battery Charger SN2400AB0; MegaChips (formerly SiTime) MEMS Oscillator SiT1532; Alps Compass HSCDTD00xA; Bosch Sensortec Pressure Sensor (likely BMP282) Battery The battery is a 1960 mAh, 3.8 V (7.45 Wh) unit, credited with giving another two hours of performance compared with the 6-series - that had a slightly smaller power supply at 1810 mAh, 6.9 Wh. For comparison, the exploding batteries in the Samsung Galaxy Note 7 are 15.4 Wh, twice the size. Compare to iPhone 6S Parts, iPhone 7 is more powerful in function and capacity! that is really a good news. We will have iPhone 7 parts and iPhone 7 Plus parts in stock soon. Please pay attention to our news. Thanks for your attention!

Samsung mobile screen price is not stable recently, it fluctuate largely in the past few weeks. It is said, Chinese government is paying more attention to those refurbished screens, many Samsung LCD suppliers and factorys have to give up their business. It makes the Samsung screens in the market are always out of stock. The price are changing every day. It is very easy to find all kinds of Samsung mobile screen and tablet screen in market before, such as Samsung Galaxy S/S1/S2/S3/S4/S5/S6/S6 edge/S7/S7 edge, S3 mini/S4 mini, Note 1/Note 2/Note 3/Note 4/Note 5/Note 6/Note 7. You can even find some unusual model or old Samsung mobile models by giveing a call. The plenty stock make the price of Samsung mobile screen to be stable in the past year. But now, everything changed. As many suppliers stop to source the Samsung LCD, many LCD are always out of stock in the market. It make the price rise every day. Sometimes, you can't buy them even on high price. Not only Samsung, but also Apple iPhone LCD meet this problem recently. Apple always pay more attention to it's patent protection, the problem on iPhone screen are more seriously. It is a nightmare for both sellrs and buyers. Many shops are forced to close last week, they can't continue their business. Resellers need to run here and their to find a Samsung LCD, and the cost is much higher than before. Those mobile repair shops are also hurted. As the price of mobile LCD is much higher than before, they need to rise their price of mobile repair, it stop some customers and reduce their business. But no matter what happened, it is for all people over the world. Business of iPhone and Samsung repair will go on, and we will continue to supply iPhone parts and Samsung screen parts. Welcome to contact us for latest price.

Good news, iPhone 7 LCD Screen come out. It is the latest version of iPhone. For mostly people, it is their first time to see iPhone 7 LCD. Below is the photo. In spite of iPhone 6 screen, the digitizer flex and LCD flex are on bottom. From the backside and front side, iPhone 7 LCD and iPhone 6S LCD are very similar. The first cost of iPhone 7 LCD is about 450$. It is very expensive!

For every people who is working in the filed of iPhone repair, high defective rate of iPhone LCD is a headache problem. By investigation, the average defective rate of iPhone LCD is about 2% to 3%. In spite of those accident, if the LCD screen from a factory is between 2% to 3%, it is normal. But this rate is really high amoung mature products. For most people, it is really hard to charge so big lose. Is there any way to reduce it? To solve this problem, we need to find the reason firstly. As we know, defective rate of electronic product are mostly higher than other normal product. Many factors will effect the circuit inside the product, such as temperature, humidity, pressure, vibrates. iPhone LCD and other mobile phone screen are semi-finished products, they are more easy to be damaged. To reduce the defective rate, we must control all procedure of the product, including manufacture, inspection, delivery, replacement. Few problem are caused on manufacture, for excample, the capability of LCD are not stable. While on production or inspection, it works well, but after few days, the function lose. The static or IC chip, or flex cable may cause this problem, but it is very very few. In case meet this affair, the factory will warranty all. Some problem may be on the inspection. There may be some small fault which is not found on inspection. For excample, small spot in screen, die pixel, 3D touch problem. If those LCD are not tested carefully, bad things will happen after iPhone screen replacement. Delivery is also a big problem. As the package on delivery always vibrate, it is easy to cause accident. Such as a screw loose, a flex cable loose, a glass is shocked... If a screen works well in inspection, but it is out of work after delivery, it is not strange. To reduce problem, we need to pack the LCD well, and carry them more carefully. The final process is on iPhone screen replacement. Bad operation may cause damage to the LCD. If the repair man don't hold the LCD correctly, he may press and damage the screen corner. The corner of iPhone LCD are fragile, it is very easy to casue touching problem. To reduce defective, we must test those iPhone LCD more carefully, ensure good quality product before shipping. Then pack the LCD with good package, and carry them carefully. After get the package, customers should handle them correctly. After all, we can control the defective rate to about 2%. How to deal with the 2% defective iPhone LCD? No worry about them, iphone-part.com offer 12 months warranty to all it's product. We will make fully exchange for you.

Apple will release iPhone 7 on September 2016. The most recent design rumors feature an iPhone 7 curved screen that attaches a home button in an attempt to stretch the likely screen of the iPhone 7 right to the bottom of the phone. This design is very similar to Samsung S6 edge. Apple didn't show any information of new generation iPhone untill now. But if the edge design is true, iPhone 7 screen will be large different with iPhone 6S LCD. A full HD, 4.9 inch iPhone 7 Curved Display, made of sapphire will also be featured in iPhone 7, something that Apple refers to as sidewall screens. These allow the user to expand the functionality of the sides of the device. If the latest patents are to be picked, it is expected that iPhone 7 will not be cornered with the single use functionality of the existing power buttons and volume. There are another 2 photos leak on internet, showing the iPhone 7 LCD backlight. They are seems more reliable. This must be the first photo of iPhone 7 screen in the world. Based on the iPhone 7 backlight photo, iP7 screen can't use edge design. It is probable use similiar screen as iPhone 6S. If we put the iPhone 7 LCD backlight and iPhone 6S LCD Backlight together, we can find many difference. But they are similar in design and performance. Is it a rumor or ture? Few days later, the result will come out.

iPhone 6S LCD and iPhone 6S Plus screen price go up on August 2016. Many customers are sensitive about the price, they really want to know why the iPhone LCD price rise and when will it go down. Actually, not only iPhone screen price rise, other Samsung mobile screen, Sony screen, LG screen price also go up. And we belive the price won't go down in a short period. The first reason for the iPhone 6S Screen price go up is the shortage of LCD. As we know, LCD is the most important part in a screen. Currently, there are 2 kinds of LCD in the maket, original LCD and Chinese LCD. Original LCD is from refurbished iPhone, it is good quality but always not enough. Chinese factory produce enough LCD for iPhone, such as Tian Ma, Long Teng, Jing Dong Fang, but they are weak in quality. The main problem is, currently, Chinese factory can only produce LCD for iPhone 5/5S/5C/6/6+, they can't produce LCD for iPhone 6S and iPhone 6S plus. So iPhone 6S and 6S Plus screen can only use those refurbished LCD. When it is out of stock, the screen price go up. On july, Samsung and Sharp closed their LCD factory, they start to produce new OLED for iPhone 8. This make the LCD for iPhone 6S and 6S plus out of stock in the market, so the screen price rise. The second reason for screen price go up come from Chinese government. As we know, almost all mobile screens and repair parts are from China Shenzhen. In beginning of August, Chinese govenment make a new polite, they check the copy or inlegal product more strickly than before. Many shops and factorys are forced to be closed as they can't sell Samsung/Sony/Apple parts who has logo. This also cause iPhone screen price go up. In my opinion, the situation will go on for several months. If material are always out of stock, the iPhone Screen price will continue rising.

Many iPhone users are annoyed by bad quality of iPhone 6 screen. The biggest problem on iPhone 6 screen is the frame dropping. After you install the screen to back housing, the frame on screen always loose. Many customers claim about it, but it is really hard to avoid the problem untill today. The new iPhone screen with cold glue fix the problem successfully. Why old iPhone 6 screen frame alwayd drop? There are 2 reasons who cause the frame problem on iPhone 6 screen. Firstly, iPhone 6 screens are ultra thin, the bonding area around the screen are very small, it makes the glue not enough to provide strong adhesive. Secondly, all iPhone screen use hot pressing glue before. This glue will be powerless when the temperature rising. So the frame on iPhone 6 screen always loose after installation, especially on summer. What is cold glue frame screen? It is a new iPhone screen which use cold glue to bond the frame bezel. The cold glue is soft, and it is stronger than hot pressing glue. Cold glue won't reduce the adhesive after temperature rised, it is more stable in adesive strength. What is more, the digitizer and frame of cold glue sceen are assembled together, it is very hard to seperate them. By this way, the frame bezel on new iphone screen are always strong. Which iPhone screen use cold glue frame? Currently, not all iPhone screens can use cold glue craft. We only use it on iPhone 6, iPhone 6 Plus and iPhone 6S sceen. The iPhone 4/4S/5/5C/5S/6S plus don't use the new glue currently. What is the price of iPhone screen with cold frame? The new cold frame iphone screen are same price as hot pressing screen. We have plenty in stock!

Many iPhone users claimed, after the iPhone 6S screen replaced, the 3D touch no work any more. Sometimes, they even can't use the Touch ID. It is a headach problem for all repair shops. Now, we explain why this happen, and how to fix the problem. As we know, there is a Touch ID built-in to the iPhone 6S mainboard and home button, the code in home button must match the code in mainboard, then the touch ID can work. If the home button is replaced, then the touch ID is out of work. So mostly, the problem happened on the home button, but not on replaced screen. what is more, there is a home connecting flex cable on iPhone 6S home button, which connect the home button to mainboard. It control the touch ID function. If the flex doesn't connect to mainboard well, the touch ID will also not work. The 3D touch function has nothing to do with screens. Mostly, after iPhone LCD replaced, the 3D touch continue to work. If there is no 3D touch function after iPhone 6S screen replacement, it probably because the flex connection is not well.